| Clamping Range |
SLZ 047 |
SLZN 067 |
SLZN 08105 |
SLZN 1152 |
SLZN 1517 |
SLZN 40200 |
SLZN 325 |
SLZN 50315 |
SLZN 85350 |
| Clamping range max Ø -without chip protector- |
4-70 | 6-75 | 8-105 | 11-152 | 15-170 | 40-200 | 30-250 | 50-315 | 85-350 |
| Clamping range max Ø -with chip protector- |
15-62 | 11-70 | 16-101 | 22-140 | 25-158 | 40-195 | 40-240 | 50-305 | 85-345 |
| Max radial loading -d3- | 70 | 79 | 105 | 161 | 170 | 200 | 250 | 320 | 350 |
| Code Configuration Standard ** | |||||||||
| With side chips protector - With cylindrical rollers - RZ Id.-Nr. |
685751 | 1685567 | 1685571 | 1685575 | 1685579 |
1685583 | 1685587 | 1685591 | 1685595 |
| With side chips protector - With convex rollers - RB Id.-Nr. |
685752 | 1685568 | 1685572 | 1685576 | 1685580 | 1685584 | 1685588 | 1685592 | 1685596 |
| Without side chips protector - With cylindrical rollers - RZ Id.-Nr. |
685753 | 1685569 | 1685573 | 1685577 | 1685581 | 1685585 | 1685589 | 1685593 | 1685597 |
| Without side chips protector - With convex rollers - RB Id.-Nr. |
685754 | 1685570 | 1685574 | 1685578 | 1685582 | 1685586 | 1685590 | 1685594 | 1685598 |
| Load capacity and Thrust Cylinder Dimension |
|||||||||
| Thrust Cylinder diameter | 40 | 35 | 50 | 80 | 80 | 80 | 100 | 100 | 100 |
| Thrust Cylinder surface cm2 | 12,5 | 9,6 | 19,6 | 50 | 50 | 50 | 78,5 | 78,5 | 78,5 |
| Max pressure bar | 25 | 54 | 53 | 62 | 68 | 40 | 57 | 80 | 61 |
| Working Pressure bar | 6-20 | 6-30 | 8-30 | 8-40 | 8-44 | 8-25 | 8-42 | 8-58 | 8-40 |
| Load for each roller with max working pressure - daN | 83 | 96 | 196 | 650 | 650 | 416 | 1100 | 1500 | 1046 |
| Max load allowed for each roller - daN | 104 | 170 | 350 | 1000 | 1000 | 667 | 1500 | 2000 | 1600 |
| Load for each roller at 20 bar - daN | 83 | 64 | 130 | 330 | 330 | 330 | 520 | 520 | 520 |
| CENTERING TOLERANCE ON THE WHOLE CLAMPING RANGE mm** | 0,02 | 0,02 | 0,02 | 0,04 | 0,04 | 0,04 | 0,05 | 0,06 | 0,06 |
| REPEATABILITY ON THE SAME Ø AT THE SAME WORKING PRESSURE mm | 0,005 | 0,005 | 0,005 | 0,005 | 0,005 | 0,005 | 0,01 | 0,01 | 0,01 |
| MAX PERIPHERAL ROLLER SPEED m/min | 800 | 800 | 800 | 725 | 725 | 725 | 715 | 700 | 700 |
| Max peripheral roller speed at 50% of max load for each roller m/min |
900 | 900 | 950 | 875 | 875 | 875 | 860 | 850 | 850 |
| Workpiece center movement in relation to 20% - 70% changing of max working pressure (at constant load) mm. Patented Device - on request - |
0,02 | 0,02 | 0,02 | 0,03 | 0,03 | 0,03 | 0,03 | 0,03 | 0,03 |
| * With constant pressure and load ** To know standard features please follow this link Standard Accessories. If you need other accessories please to specify it in your order. |
|||||||||